Pages

Friday 19 July 2024

A Cozy Office - Completed

I'm not sure how a month has gone by since anything was reported from the world of 'odsock Corner, things are progressing quite slowly due to a combination of factors but are at least progressing... we'll return to what has become the saga of the wall and gates in due course, but for now the little office is complete.


Wanting to totally contrast with the example on Shifting Sands this one is painted in a dark colour with red brick base. The base and the main part of the building were painted as separate units and only brought together at the varnishing stage. Even with this split I had to carry out a fair bit of masking of the wooden cross-pieces under the floor and brickwork to achieve a neat finish.

The main part of the structure saw masking to allow the window frames to be sprayed with white primer, after which the masking was reversed and the walls painted in Vallejo Dark Olive Drab. A wash-over in a darker shade enhanced the plank lines, then dry brushed with lighter shades to enhance the plank edges. Window frames were treated to a top coat of off-white and a lot of weathering to reduce their brightness. In contrast the roof is largely washes of greys over the original primer.


The interior details were painted up and added into the hut, the desk squeezing in along one end wall. The chair was located in place into two pre-drilled holes with two short pieces of 0.5mm brass wire in the rear legs, cut down from their longer length as used to hold the object whilst painting. The stove was positioned as closely as possible under the chimney on the roof using a length of brass wire as a guide.


The Titfield Thunderbolt poster was added to the wall as a little extra detail, coming from a sheet free with a magazine years ago. It covers a couple of air holes in the casting and a mark I made on the wall fitting the seat... 
 

At this stage I realised that there was perhaps a little too much detail painting on the interior as you cannot really see them with the roof in place! I have made passive provision for lighting via a hole in the base and floor around the door frame area to thread a wire through, although I have no plans to add this at this stage.

Colin

No comments:

Post a Comment