Monday, 28 February 2022

The Humble Van

One O9 wagon that has ducked the limelight is my very simple 4w van, built back in 2012 and never really used that much. At the time it was built I described it as a "quickie build using a spare Black Dog Mining under frame and some Parkside Dundas 4mm scale van doors. The pointed roof is just to be different!". The Black Dog chassis was swapped out for a Peco chassis and Black Dog chassis adaptor not long after being built, which actually had the effect of lowering the whole wagon down, as I omitted to leave the Peco weight above the chassis. As the N gauge axleboxes were largely hidden I did nothing about hiding them. 


Whilst creating the wagon fleet for the project I wanted to include the van but also wanted to add a little more height - it is to large 15" gauge dimensions so not as big as commercially available O9 vans. By popping out the Peco chassis I was able to reinstate the weight, and add a little extra above the chassis as well. Overall I have only added 1mm to the height but it does make a visual difference, of course the knock-on effect of this was to require a change to the coupler position. With the axle boxes now exposed I have repurposed what was left of some RCL Hudson boxes used on a previous Peco conversion.


Paintwork has been matched with the original and the whole van given a fresh coat of matt varnish - apart from the roof where I had created a pleasing worn metal finish in places that I wanted to preserve the gleam of! 

In other news the more recent of the 5ft wagons was running awfully on test and after investigation has had its fake Black Dog style axleboxes removed and replaced by Wizzard/51L HRC001 Highland Railway grease axlebox castings - I had made the previous joint between axlebox and chassis frame too solid to get the wheels in freely, the new ones are only fixed to chassis so can move to allow the wheels in/out. The new fittings were painted and weathered to match the existing paintwork.


The Chivers R&ER Theakston wagon has now received MicroTrains 1023 couplers which look a lot better balanced than the 1015s fitted originally. I opted to retain the 7mm Bemo wheelsets rather than replace with smaller Peco examples.

Colin
 

Monday, 14 February 2022

An afternoon at the races

Back in September I went to a small local exhibition and was quite content with being at a smaller show. I wasn't planning to go to the much larger exhibition at Doncaster racecourse but after some thought decided at about 11.00 on Sunday morning to make the short trip to the show. My plan was to concentrate on the layouts and to try and ignore the trade...

The layout I really wanted to see was the smallest there, Michael Campbell's Loctern Quay, and I wasn't disappointed! I managed a couple of snaps on my phone:


Not long after taking the pictures Michael's phone rang and I was handed the controller(!) With a Minitrains loco and MicroTrains couplers it was very easy to operate, with photo-card tiddlywink computer to generate the trains. I liked the interaction where Michael asked members if the audience to pick cards and he says this does sometimes result in them hanging around a bit longer to watch "their" train being formed.


I think I spent more time in front of this layout than any other at the show, so thank you Michael for braving the trip North!


One thing that struck me were several layouts that placed the railway well in it's landscape. 'Loctern Quay' does this well in an urban setting, but one of my favourites was 'Blueball Summit' in 2mm finescale - possibly the finest scenic modelling there, I overheard someone say what I had thought, that is was almost a smaller scale 'Worlds End'.


I did spend a little money in end, as it had died down considerably after 3pm I had another walk around and a quick look at the trade stands, where I picked up a secondhand but unopened Parkside Dundas 009 chassis kit - largely because it had the old style wheels in it, which are useful if you ever need them for scenic purposes as they blacken up easily. I also picked up a secondhand but new-in-box Peco 009 point, looking online once home I found I had paid about 1/2 price for both. There are bargains out there for narrow gauge modellers...

Colin

Saturday, 12 February 2022

All tooled up with no place to go...

Last seen a few weeks ago, the rebuilt tool wagon is now completed, varnished and weathered. The project suffered a setback midway through painting and had to be stripped, re-primed and a fresh start made. As a change from the original grey the new colour is Vallejo blue-grey with strapping and underframe in black-grey and the roof in a slightly lighter mix of the same.

Sadly the lighter colour and photos seem to over-emphasise that the roof section of the wagon does not fit as well as it should do and there are a few gaps, especially along the edges of the lifting sections. This is acceptable as they are meant to be separate parts but also annoying as I should have spotted the fit issue before painting, especially after the strip down! Here I've posed the tool wagon with the open wagon that shares the same underframe design, showing how the rebuilt wagon now fits in with the new builds.


Sneaking through the paintshop and the last of the post-New Year wagon projects is an additional plank added to a Black Dog style 'Tops' wagon in the style of an improvised local modification. In common with the drop-side wagons the strapping joining old and new is made from cut-down Grandt Line fishplate mouldings. The extra plank and corner supports were constructed as a separate unit, painted and then added to an existing wagon built last year. The timber shade is deliberately different to the original wagon to emphasise the "add-on" nature.

With the completion of these two the paintshop is now strangely empty, but rumour has it that the engineers are looking for some more wagons to tinker with...

Colin

Sunday, 6 February 2022

Anchor-esqe in O9

A couple of weeks ago I took delivery of a new O9 locomotive from John Flower at A1 Models. He had advised that something was on the way and I had mis-read the email thinking it would be etched, imagine my surprise to receive a 3D print and for it to be a proper 15" gauge miniature railway outline locomotive!


Now of course that shows it after a bit of treatment as I forgot to get a decent shot of it as it came, but you can get an idea from John's pictures on eBay (and indeed buy one). The print quality as it comes is smoother than the last Alan Keef loco, but not quite to Shapeways FUD standards (but not as brittle).

The design is based on 'Royal Anchor', built by Charles Lane of Liphook at the pub of the same name, tested at New Romney and then resident at Ravenglass for many years before moving to Carnforth and subsequently to California. Dimensionally it is pretty spot-on, to be hyper-critical the cab front should be gently curved across the width and the front windows maybe a touch bigger but I don't find that too distracting. The doors really ought to be flush with the sides and by John's own admission he has forgotten to add the bufferbeams! I will be completing the model as a freelance 'inspired by' machine, typical of a 1960s miniature railway style.

The first job was to prepare the print, as the roofline was a little ridged I actually went over the curve of the roof with an emery board to start the smoothing process, then after a clean up sprayed red plastic primer as the initial coating, as seen here:

That tends to make things look worse than they are! After 24 hours drying, 400 grit wet and dry was then used to smooth back the finish, using home made sanding sticks. After another clean up, yellow filler primer was then sprayed and after another 24 hours drying, 800 grit, used both wet and dry used to smooth a lot of it away, resulting in a Wisconsin Central/EWS camouflage finish (!)


After a further clean-up I then opted to spray the roof and cab window areas in another coat of filler primer, and after another 24 hours smoothed everything back with 1200 grit, used wet, ready for a last clean and then a coat of grey primer.

The print slips nicely over the cheapest Bachmann US N gauge bogie diesel chassis, in my case a U36B. It will also fit over a range of other suitable chassis in a similar mould. I've posed it on the Bachmann chassis but I will check how well it performs before making a final choice as I have an Atlas chassis that would also fit which has the advantages of flywheels and maybe smoother starting. I suppose it depends on how much it will actually get used... 


More as the project develops.
 
Colin




Tuesday, 1 February 2022

Snailbeach - at a Snail's pace!

I received a couple of Dundas Snailbeach wagon kits as a Christmas gift from my Dad after I mentioned that I might get a couple of the Peco ones when they came out. What I had forgotten to say is that the reason I was interested in them was based on them being RTR and that the kit had something of a "reputation"... 

Between Christmas and New Year I started to build one of the kits, which has been an interesting build process to say the least. Any hopper wagon in kit form will be tricky, more so from what must be among the oldest moulds in the range. I probably took away too much material on the insides of the joints, you can see some of the styrene strip infill on the inside. A few mistakes have been made, such as scribing plank lines into the inside of the upper sides, thinking the old tooling just didn't feature them... before discovering that the real wagons had metal linings, and having to fill the lines back in! 


I paid particular attention to the ends of the chassis, refining the shape, adding a 5 thou overlay wrapped around and adding new bumpers from Evergreen channel section. I have added some deliberate distressing on some of the planks and some very dubious looking brake gear, with the proviso that it isn't a Snailbeach wagon but one supplied to the Old Quarry Line. 

One area where I did make a change was at the left hand end of each upper side, trimming the corner plate back by approx 1mm to line up with the plate on the angled section and also making each end section equal in length. I have had to add new bolt heads harvested from another Dundas part that was redundant. All painted up in primer it looks OK, and you can see some of the distressing I added to the planking. 


Wanting a finish that would differ from any future RTR companions I applied a weathered wood effect, including some planks in "wood" colour and some in grey, black-grey and brown washes. The ironwork has been painted black-grey with brown/rust washes. The interior metal plating is finished in a base rust colour with various stippled effects. The hopper is seen here after varnishing but before weathering.


Once varnished the additional weathering and finishing work was completed. This is largely dry-brushing on the exterior using a grey/cream colour in an attempt to represent a wagon that has been in a quarry environment, along with some gunmetal dry-brushed on the axleboxes.

Unfortunately the lighting has picked up the plank lines I scribed and thought I had subsequently filled, you cannot really see them at normal viewing distance.


Inside the wagon I have added a representation of load remains, starting with the leftover mix of the acrylic paints used for the dry brushing and a dab of household filler. Once dry weathering powders were added to vary the colour a little and spread the effect further up the wagon sides.


Greenwich couplers have been added at ether end, I could perhaps have moved them in by another 1/2mm but wanted to ensure that the loop did not have any interference from the bumpers when lifting.

No doubt the forthcoming Peco model will be quicker to get into service, but a lot less individual!

Colin



 

Saturday, 22 January 2022

The Imposters Return - In Colour!

Sorry, despite the name this is not a forgotten ITC TV series from the 1960s! 

I cannot quite believe that it was September when we last saw these two wagons. In mid December my attention returned to them and I decided to reverse the earlier decision to fit a simple coupling system of loops and hooks, opting instead to fit MicroTrains couplers after all. This would entail a little surgery to the headstocks in order to accommodate the draft boxes.


With the openings cut at the correct heights Milliput was used to create a level, solid area behind the headstock of both wagons. On the longer one this is key to giving an area that can be drilled to take the mounting screw, on the shorter wagon it is just to stop the draft box tipping backwards. Once set, holes were drilled centrally 1mm back from the front face of the headstock, taking care not to drill through the floor... On the longer wagon part of the hole is in the styrene headstock, part in the Milliput, no doubt a bit in the lead weight and then into the styrene floor! The holes were crudely 'tapped' using a MicroTrains coupler screw ready for when couplers are fitted.


Before Christmas the two wagons progressed through the paintshop. The shorter wagon in Humbrol red-brown and the longer one in grey. New Years Eve again provided the opportunity to apply Humbrol matt varnish from and aerosol. There is still some weathering work to do, notably on the coupler pocket on the grey wagon! 


The shorter wagon has brown couplers, from a pack I picked up in desperation at some stage. The previously completed "matching" wagon carries the other pair. This set had been on my Chivers Theakston wagon, but had never looked quite right. I had fitted this wagon with Bemo 7mm wheelsets that I had acquired from 009 sales at a Mansfield members day a few years ago, but it always looked a bit tip-toed and out of balance with other stock with the couplers hanging under the buffer beam. Playing about I popped a set of Peco wheels in and sat it alongside the short wagon it had donated it's coupling to.


It now seemed to sit a little happier alongside the other stock, so I may look at fitting different MicroTrains couplers (1023's) and it may have a place on the future layout. I have previously conjectured about using a Black Dog mine tub in an agricultural setting for the disposal of manure etc, but rejected it as it looked out of place with other vehicles. The Theakston could fulfil this role... 

A wagon assured a place alongside the new stock is my tool wagon. Probably last seen on the blog in Exmoor on Tour as a coupling adaptor. The chassis already matches that on the new grey wagon and the opportunity has been taken to refine the strapping detail and add Grandt Line hinges on the roof doors to match the open wagons. 


With all that work a repaint was necessary, this gives a chance to change the colour and I have chosen to go down the route of something a little more unusual...

Colin


Sunday, 16 January 2022

Bumper Bungalow Update - Painting and Finishing

A patch of reasonable weather a week or so before Christmas allowed the workshop to be used for spraying without having to warm it up too much, giving an opportunity to give the bungalow a full coat of primer. As ever the primer brings all the different materials together as one and forms a good base for what follows. Throughout painting I have tried to use the principle of applying washes and near dry-brushes wherever possible, avoiding "solid" colour if I can. 


The roof tiles were given a wash of Vallejo 'Black Grey', then almost dry-brushed with a mix of Vallejo 'Hull Red' and a terracotta shade that I had bought especially for the job. A further wash was then followed by dry-brushing with the terracotta shade, actually Army Painter 'Tanned Flesh'. This was bought especially for the job after my home-brew mixes failed to get the right shade.

The concrete render started out as Railmatch 'Concrete' with a touch of grey added, then washes of brown, black-grey and dry brushing with light grey and sand shades. Generally the old Airfix render mouldings come out rather well! Window frames were painted away from the model in Vallejo 'Olive Green', dry brushed with the same manufacturers 'Green Grey'. The same treatment was given to the sills on the wall mouldings. Windows frames were fixed in place once most of the painting was complete.


The 'Tanned Flesh' paint formed the basis of brick and chimney pot colouring, and once painted the chimney stacks were flashed into the roof using pieces of foil harvested from an egg-shaped Cadbury's product available in the early part of the year. With painting completed before the Christmas break I waited on a relatively mild, dry day to matt varnish everything...


That mild, dry day turned out, rather unexpectedly, to be the afternoon of New Year's Eve. Humbrol acrylic matt varnish was applied from an aerosol giving a pleasing finish. The next step was to add some moss and bird deposit effects to the roof, both for realism and to try and hide some of the dodgy tiling that I can only blame on myself...

Vallejo matt medium was applied to areas that needed moss adding and a blend of fine foam scatters scattered on through a sieve. Once dry various green, yellow and grey acrylics were stippled on to add to the effect.

That shot really does show that the roof tiles are far from perfect...

After the New Year weekend the bungalow got placed to one side as I got involved in some wagon projects (more another time), but I have finally got around to adding the glazing to the windows. This uses 20 thou clear styrene, fixed behind the frames using Kleer.


The front door and two of the narrow windows (to represent the bathroom and toilet) were "frosted" by sanding both sides with wet wet and dry paper. I think some internal partitioning might eventually be required to stop the see-through effect, and of course some curtains on the windows to stop you seeing in too far, and depending on how it is eventually used even some grunge inside or out of the glazing.


Overall I am very pleased with how this had turned out. Although officially a project with no place, it has proved a useful refresher in building colouring and techniques that will be useful for future 7mm scale work...

Colin