Railway modelling in 7mm scale on 9mm gauge track, representing 15" gauge miniature railways and 18" gauge industrial railways. (Plus anything else that I choose to include!)
Saturday, 14 November 2026
Hudson Hacking - The Sequel
Tuesday, 6 October 2026
Junkbox Jury - The Finale
It's nearly a year since work began on the Junkbox Jury series of models and a while since they appeared on the blog. There were a couple of loose ends that I felt needed tidying up, including one that I swore I had published here previously, but it appears that I didn't...
The first unfinished item was last seen as a flat wagon with pseudo-Hudson axleboxes and not a lot else. Combined with the A1 Models loco bonnet that ever-so-nearly ended up on the dismantled diesel they were brought together to create a generator on a flat wagon. Back in February I reached an impasse as to whether the load should be loose, sat on a couple of planks and strapped down, or should sit permanently on the wagon with some 'L' section and bolts to hold it in place... After much thought I opted for the latter.
Friday, 2 October 2026
A Cunning Plan - Part 2 - Flat In/Flat Out
As indicated in the previous post, the Heywood flat wagon would spend it's time hidden behind a fence, regular readers may have guessed that the destination would be the right-angle siding on 'Odsock Corner'. In position the axleboxes are barely visible from the main viewing side and hidden behind the sheeted object from the other side. At least I have the satisfaction the axlebox detail is mostly there...
Sunday, 27 September 2026
A Cunning Plan - Part 1 - The Heywood Flat
"I have a cunning plan..." or words to that effect, muttered only to myself but possibly broadcast on the NGRM Online forum a couple of months ago. The plan directly affects both 'Odsock Corner' and 'To The End' but starts in the acquired box of Owen Ryder O9 bits with a wagon floor casting.
I didn't need an operational wagon but one that would look good hidden behind a fence (more about where in another instalment), so not having the correct axleboxes wouldn't be an issue. The top of the casting had the plank lines re-scribed using a Olfa-style cutter which made for a very neat finish once painted. Owen's coupling castings add some much needed detail. However, what lies underneath is a very different story...
Friday, 18 September 2026
Heywood Brake Van - The Paintshop
I'm pleased to report that the Heywood brake van is now complete, painted and ready for service...
Saturday, 29 August 2026
Heywood Brake Van - The Roof
The roof of the Heywood brake van has been perhaps the most involved part of the project. The kit parts included only the main frame, I've no idea what was supplied with the kit originally for the main piece. The scrapbox revealed some 20 thou black styrene that I had already curved over a drinks can some time ago, and there was sufficient material to do the job twice, which turned out to be useful...
I had decided that the roof should be removable during the painting stages and as the frame piece really just balanced on the four pillars, I wanted some way of locating it at the final assembly stage. I opted to use some 3 x 1mm lengths of nickel silver etch fret attached to the inside of the pillars to achieve this, attached in place with superglue, 2mm on the pillar and 1mm above for the frame to locate to.
Sunday, 23 August 2026
Heywood Brake Van
I recently acquired a collection of Owen Ryder O9 whitemetal castings via the 7mm Narrow Gauge Association which included an almost complete set of parts for the Heywood Eaton Hall 4w brake van. The missing parts included the etched underframe and axlebox parts, the seat back and whatever was used to form the roof.
The castings required a little fettling here and there but otherwise were not bad for something marked "1994". With the seat back made up from styrene, end rails formed from 0.7mm brass wire and holes drilled in the floor piece to accept them, the main parts are seen here ready to assemble.
Tuesday, 18 August 2026
Remembering the Black Cat
It is one year since I wrote A Black Cat Crossed my Path, so on the anniversary of Mr Sooty's passing it seems appropriate to reveal something dedicated to his memory...
Saturday, 18 July 2026
To The End
I think I'm now at a point where I can say that 'To The End...' is now as complete as it can be. The lower edges of the board have all now been painted with grey primer/undercoat, three coats with some light sanding in-between coats and the final coat applied with a sponge roller.
I've also fixed the backscene board in place. This is a piece of hardboard, not the most ideal of materials as it has a tendency to warp when un-framed. Unusually this piece is actually double-faced, having been salvaged from an old wardrobe, and had already been primed both sides and painted sky blue on one as part of another project. Newly cut edges were touched in with primer and everything was going well until I dropped the board and damaged a corner! Argh!!
Saturday, 4 July 2026
A Scenic Sprint (To The End)
- added further leaf litter around the track to match that on the micro diorama,
- added static grass in a mixture of colours, aiming for variation but keeping it subtle,
- created bushes/hedges from teased rubberised horsehair, with static grass fibres added a la Gravett, then foliage, and avoiding foliage matts to get a better effect,
- reinstated the fence, with a new section running into the hedge that was originally created for Odsock Corner,
- added detail/texture to the grass using MiniNatur flowers, Martin Welberg weeds and some recently acquired products.
Sunday, 28 June 2026
To The End (Revisited)
A couple of months ago I mocked-up of a concept to expand one of my micro-dioramas 'To the End'. There is some background to this scene in Diorama Developments - To The End back in 2021, but to summarise it started life in 2016 as a 140 x 70mm scene, later expanded to 220 x 70mm. With it's home in the display cabinet no longer available I have started work to develop a larger scene.
My initial though had been to go up to the 15" x 6" (375 x 150mm) format of 'The Headshunt' and 'Beck Bridge', but it has actually ended up a little smaller in order that it can fit into a 9 litre 'Really Useful Box', with an available height of 210mm.
Wednesday, 24 June 2026
Trailing Behind
I haven't done a lot of modelling of late, but I have completed this Gubbin Box Models Heywood open that I bought last year. I have now put to use as a new luggage trailer for the tramcar/railcar. I had previously used a Black Dog Mining style wagon for this, but it looked wrong against the railcar on the 5" curve of 'Odsock Corner. The Heywood wagon is a little narrower and should sit a little better on the curve.
Wednesday, 29 April 2026
Three Point Doodles - Take Two
As promised, we return to the theme of the miniature railway depot/shed scene for another plan. This time however I have flipped the plan back-to-front (the wonders of photo manipulation!) so the lead-off leaves the scene behind a building. I have not drawn it here, but the idea of revealing the interior of the front-right building was appealing. This version does need a fiddle stick off to the right to allow locos and stock to be exchanged.
Sunday, 26 April 2026
Three Point Doodles
I've found myself doodling again... several times... I'll spare you all dumping all the designs in one post, so here are the first two, based on the 'Tragbar/Chetley' plan. I realised that I may not have really done this justice in my original mock-ups, and looking carefully the rearmost, L/H point was aligned wrongly.
The first plan on the revised template is designed to be simpler scenically than the Inglenook plans, although it shares some common elements. There are less buildings and any provision for concealed, rear operation, point controls is dealt with by a low rock face. A grounded 18" gauge wagon body (which I've possibly drawn a little too small) from 422 Modelmaking components sits behind a sleeper-edged platform. This arrangement will allow operation of a passenger train formed of couple of 4w coaches and for another locomotive to release the incoming locomotive.
Wednesday, 22 April 2026
Another Od-Job
Another day, another od-job. The old Black Dog Mining tub now has it's load of garden waste. Baking paper was again used to line the inside of the wagon and it was filled with offcuts of rubberised horsehair (from a hedge that never made it onto the layout), plus some leftover bits of sea foam that had previously been painted a darker brown. The baking paper liner was removed from the wagon before lots of hairspray was used to fix it together and left to set overnight propped up to retain the shape.
Sunday, 19 April 2026
Odsock Od-Jobs
Whilst dithering in the workshop with all the "what next?" ideas I opted to get 'odsock Corner out of the box for a play and ended up doing a few odd-jobs. Firstly the Lister having a stretch on the circuit. This needs a little odd job of it's own when I have the patience, the pedal beneath the driver's right foot is absent, at least it is still in the box!
Sunday, 12 April 2026
Ingle-doodles
Sunday, 5 April 2026
Easter Reflections
Six Easter's ago I started creation what should have been my next layout, an O9 version of the Julian Andrews brickworks plan, later known as 'Avalon Brickworks' in the stewardship of Howard Martin. We were in lockdown and the weekend saw rapid progress on the layout during the day and depletion of a small keg of Hobgoblin (Ruby) in the evenings, and maybe afternoons... All the details
- The curve at the top-right hand corner was never smooth enough and really needed completely relaying.
- The angle and curve in the middle siding could never be decided on (in many ways due to me persisting trying to use MicroTrains couplers) - now actually I think it looks right as first laid!
- The fiddle yard siding was later extended and curved and always seemed to get in the way.
- I should have raised the track bed up from the board surface as I did on 'Shifting Sands', it always looked too 'sunken' around the edges.
The inglenook variations on that board hold a little more possibility for this by using them as a desk-sitter, but the board length will only just fit across the desk and with a solid wall either side I foresee issues getting it into place reliably. The original 'Upcycle' scheme that was abandoned well before Easter 2020 was a little shorter in length and perhaps better for it, although it could have benefitted from a little more depth. Height-wise it was designed to fit into a space and was going to present a challenge with fairly low-key scenery up to hedge/fence height.
However, at the moment, the idea of a single board that is shorter than the 30" of the Scale Model Scenery board, desk-sits easily and has low height scenery to store away with ease, is quite appealing. If it could offer a continuous run and some shunting possibilities, have a fairly generic setting and use the stock built recently with Greenwich couplers, it might tick a lot of boxes. If it looks like what was laid six years ago, that will be entirely a coincidence...
Food for thought...
Colin




























