Junkbox Jury - Wagon Bashing

A few weeks ago I hinted that some wagon tinkering could be on the cards in the wake of my experimentation with Greenwich couplers. In passing I mentioned that there were a couple of experimental wagons started some time ago, so they were brought out of storage to see what could be done with them. You could call it a dive into the junk box...

The first was a short (5ft) wagon, currently a flat but only because it got no further! The chassis under this is a Peco 15ft unit cut-down to a 14mm wheelbase, previously under a modified RCL skip frame. It was a little unloved and has now gained fake 'Hudson' style axleboxes assembled from styrene sections.

Sorry that isn't a great photo due to all the white styrene... At present this is as far it will go pending further developments but it could end up with sides and/or ends in due course. Other than the new axle boxes the only other work completed was to fill in the cut-out in one bufferbeam that was designed to set the coupler at the higher position, to match the other end at the lower height. I didn't spot that it actually had acquired odd wheelsets until after taking the next photo...

The other was a 6ft wagon, again a flat by default, but designed to use Chivers Finelines 'Theakston' axleboxes, subsequently removed. The frame was too narrow to put a Peco chassis within, so I opted to remove the floor and save it for reuse, and then create an abandoned underframe with the remainder. The axle boxes are missing, leaving boltholes and the odd remaining bolt, using some EDM mouldings and Grandt Line versions on the frames. I had intended to use this on 'The Headshunt' to replace the damaged Hudson flat, however it soon had company...

The damaged remains of another Hudson frame surfaced... This has had the slots cut for MicroTrains couplers filled with Milliput and smoothed to shape. The intention is now that this will be destined for 'The Headshunt' and the scratchbuilt frame prepared for future use elsewhere.

Once I had started the dive into the junk box more potential uses for started-but-unfinished projects came to mind, we'll take a look at another in a future post.

Colin