Hidden in Plain Sight

In my last posting about a potential plan to extend 'Beck Bridge' into a thin micro layout, I was torn between hiding a sector plate off-scene to close off the loop or making it a scenic feature. In the recesses of my mind another idea from Neil Rushby came back to me, from an article in the August 2008 Railway Modeller called 'A Scenic Sector Plate', about trying to hide a sector plate in plain sight.

The Ministry of Daft Ideas now seems to have developed a 3D visualisation department complete with a suite of items for planning purposes to see if this could be applied to the Beck Bridge rebuild.

This looks quite effectively hidden but not as cramped as when I mocked-up a hole-in-the-sky hidden version. Whilst the sector plate is aligned to the back road (which would be the "normal" position) the water tower hides the fact that the front line is disconnected. The structure alongside this is nominally styled after a phone box but could equally be a portaloo or even the TARDIS...

From the wider angle the result is also reasonable.

This is all working towards the formulation of my plans, there may be a totally separate 'Plan B' to also consider but that is currently an un-developed theory!

Colin

Onwards from Beck Bridge

Since building the 'Beck Bridge' diorama it has spent most of it's time sat in a cardboard box either in the workshop or railway cupboard. The only times it has seen the light of day was for the 009 Society exhibition in Mansfield and for a daylight photo-shoot, producing shots such as this.

I've spent some time lately pondering what to do with it in the longer term as it doesn't really suit as a photographic set in the same way the 'The Headshunt' does. Now the Ministry of Daft Ideas came up with a few crazy ones including incorporating it into a continuous run. A sketch exists but I'll spare you that!

However, a post about "picture frame" scenes on the NGRM Online forum sparked an interesting thought, could 'Beck Bridge' be incorporated into a narrow, picture-frame style layout? Using a print out of the overall view I sketched a few additions, then scanned this in and composited the original picture back in...

The idea is to add to the right-hand end, doubling the length from 14 to 28 inches. This would be a fairly destructive act but I think achievable due to the way that the frame is constructed. Trackwork would have to be reworked to remove the KB scale dummy rail joiners that would stop smooth running and as part of this process I would actually lift some of the existing track and replace it with a point that feeds a short loop for a station.

I've sketched in a loco-length sector plate at the end of this hidden by the wing and most likely on a bolt-on board. A few commentators have suggested that this could be made fully scenic or be fully scenic and a turntable. I'm not fully sure about that element yet, I have a theory about making the scene seem longer by not visibly closing off the loop. I also like the idea of the loco vanishing for a few seconds and reappearing on the other line. Neil Rushby's 'Isle of Avalon Tramway' was in my mind, where a traverser was hidden in an overall roof and engine shed to great effect (seen here in new ownership). I didn't sketch in a roof but it is a possibility....

To the left-hand end a cassette fiddle yard would be added as a separate board.  Short trains such as my Exmoor tank and a couple of coaches could be operated effectively on this set-up. We shall see what develops as there are a couple of alternatives to consider as well...

Colin

Coupling Clinic

One of the advantages of the desk-sitter test track is that it allows for some tinkering and testing of couplers as well as locomotive mechanisms. A lot of the MicroTrains couplers on my wagon fleet have been added as a necessity but never actually used very much for real shunting. Getting them in a fit state to do so can involve a little fettling of drop-arms and plenty of 'Grease-Em' graphite lubricant. 

Of course this only works if the couplers themselves are in a good state. One of the bogies on the van in the picture had been equipped with a Kadee knuckle spring rather than the correct MicroTrains one. I vaguely recall doing this at a time I was short of springs and it worked to an extent but not to uncouple! Replaced with the correct item it was a problem soon resolved, although the idea is a good one of you have couplers in use that you don't want to uncouple accidentally.

So far about 10 of the Shifting Sands and extended fleets have been seen to, the result being much more reliable coupling and uncoupling. This all informs future layout planning....

Colin

Without a Loop

Unable to run to Humberston station this season the Cleethorpes Coast Light Railway has been operating a half-line service between Kingsway and Lakeside stations. At Lakeside a problem presents itself as the through platform (3) has no loop and the former terminus platforms (1 and 2) have lost theirs. A pattern of operating has been developed that avoids reversing empty stock or shunt-release.

On Monday 28th October, in bright, low, light I was able to record the sequence using the LNER O4 2-8-0 and the ex Bush Mill Railway 'DA1'. Here the O4 approaches Lakeside station entering the passing loop.

The train draws to a halt before the point that splits the line between platform3 (where DA1 is waiting) and platform 1 on the right.

The guard uncouples the locomotive from the train.

The O4 draws forward into platform 1 as the guard prepares to change the point to allow DA1 to move onto the train.

The guard signals to the driver of DA1 as it moves towards the train.

DA1 draws the train forward into platform 3 to terminate.

With the train in platform 3 the O4 backs out of platform 1 and moves forward onto the train.

The train is now ready to depart back to Kingsway. After departure DA1 will be moved back up the platform to repeat the sequence for the next arrival.

I do like to record these movements in the hope that at some point it will prove inspirational to a layout project, almost anything is possible!

Colin

Did I just see that on TV?

I know that the Great Model Railway Challenge TV series isn't everyone's cup of tea, but I have watched the second series with interest, and it is fair to say that amongst the odd themes has been some good modelling and more time dedicated to the participants explaining what they have done.

Catching up on the final I discovered an interesting project from Team Grantham called "Fun of the Fairground". The scale wasn't really mentioned but it certainly wasn't 1/76. I did spot the combination  described as a "miniature train" of an N gauge Peppercorn Pacific hauling modified Peco Lynton & Barnstable open wagons carrying overscale passengers.

It might not be O9 but it's probably as close as we'll come to seeing it on TV for a while...

Colin