Remembering the Black Cat

It is one year since I wrote A Black Cat Crossed my Path, so on the anniversary of Mr Sooty's passing it seems appropriate to reveal something dedicated to his memory...

The nameplate is from Narrow Planet/Light Railway Stores and has been mounted in the fashion of 'Gwril' at Fairbourne, the spare plate is safely stored away.

Colin

Odsock's Lister in Green

I had originally intended to reveal the painted FK3D Lister a few days ago but the original set of photos revealed a chip in the paint on the driver figure's hat and I just couldn't un-see it... hence repairs and a re-shoot. As a bonus that time gap allowed me to fit the couplings to the model and properly finish it off.

Normally when painting a locomotive model I use a process of primer> main colour (spray or by hand)> and then ancillary colours, but for this model I wanted to try something different, more akin to the way I might paint an item of machinery or a figure. Once the grey primer was on I ran a fairly heavy black-grey wash over the model, making sure it sat in the many crevices, angles and recesses of the print. I then masked off and painted the coupler blocks and brake wheel, firstly red-brown as an undercoat and the dry-brushing red over the top. Similarly the bonnet front was masked off and dry-brushed with several coats of a light grey. The intention was to allow the darker colour to remain in the recesses and add depth.

With the paint on the coupler blocks, brake wheel and bonnet front fully dry, I then masked them off to protect then and started to apply the green. Vallejo 'Flat Green' is the order of the day (again!) with a spot of a darker green added in to make a future stage easier. The colour was applied with a large flat brush and was again almost dry-brushed. I was particularly keen not to flood the solebar areas with colour as my intention was to use the dark grey base to provide some extra shadow and create an impression of more depth. The darker wash also shows around the grilles on the bonnet and in may other little spots.

The green had covered in one coat, but I then ran over it again very lightly with the undarkened colour, subtly highlighting the edges of raised detail. Other details such as the gear lever were picked out in appropriate colours and some extra dirt effects added in places. The 'Lister' logos on the bonnet side were dry-brushed in the light grey and I attempted to do the same in green to the 'AUTO TRUCK' lettering on the front. Meanwhile the driver had been painted, again dry-brushing over a dark grey wash, using subtle colours so he doesn't stand out too much. Everything was treated to a spray of Humbrol acrylic matt varnish to seal it all in and give a flat finish.

Finally my attention turned to the couplings. The print does have NEM style receptacles designed to take a Peco coupler, but not at "standard" height. I did try a Greenwich NEM style coupler but it didn't locate properly and even if bent down to the lower height would have stuck out a fair way. In the end I have used a pair of standard Greenwich couplers (the ones I had actually used to experiment with on O9 models a few months ago) located at the base of the block and bent upwards to the correct height. A rather unusual modification is that the loopholes that usually hold the coupler loop have been bent upwards and actually now help locate the coupler into the coupler box. A new hole was drilled in the shortened shank and a Peco trackpin through the coupler block, secured with superglue, holds the coupler in place. 

Colin

Odsock's Lister

Although my intention had been to use the Abbey Light Railway style Simplex on 'odsock Corner the reality is that it may be a little too big for some of the clearances. It does get around but only just, so something a little smaller would be more suitable. That same Christmas a couple of years ago I also received a print from the same source (FK3D) for a Lister, and I have now started to work it up into a useful locomotive. 

The print doesn't need much work, most of what I have done isn't really visible, but I did find that I had to scrape away a bit of material underneath to get the Kato 'core' to fit. Part of me thinks that it ought to go in a bit further but I don't want to push my luck... As always a coat of grey primer really enhances the print, there is a lot of detail on there that you cannot see when it is reflecting the light!

Underneath the squeezed in Kato chassis is visible. I have drilled out part of the balance weights at either end of the body, but for different reasons. The right-hand end was in order to add 'liquid lead' as part of a scheme to counter-balance a whitemetal driver (the bonnet also had a suitable compartment opened up and filled). The left-hand end was to reduce the weight a little, although it could be used for weight if another driver is ever used. The weights were secured with slow-setting epoxy.

The body separated from the chassis. As the base plate used was from a 11-108 chassis, moulded in shiny grey plastic, I have carefully prepared it with 1200-grit wet and dry, cleaned it up, primed with plastic primer and then top-coated with matt black aerosol paint to get a hard-wearing, matt finish. The 3D printed top clip, that holds the motor in place, was also treated to this finish, as both are visible at certain angles.

The driver is from the 'Heroes of the Footplate' range and is a casting I've had many years, his right arm is adjustable and has been in a number of different positions as he's been offered up to different locos over time. Adjusted again, it sits naturally over a control lever. His right foot is on a pedal that had actually broken off the print, it was shortened to suit before being added back in place. I had to build up his posterior with Milliput to sit neatly in the tractor style seat. He's held in place by a combination of holes in the footplate to accommodate 0.5mm brass wire in his feet, and a rather painful looking spike in the centre column of the seat...

Whilst I said I hadn't done much to modify the print there was one thing that I did change. The tops of the axle 'W' plates had triangular cutouts where they should have continuous sloped sides, so these were filled in with Milliput and carefully smoothed to shape. The only other thing I changed was to replace the gear lever with a Peco track pin with a touch of epoxy to shape the head, as the original seemingly "vanished"...

Painting has now commenced, so the usual rule applies until you see it again!

Colin

 

Instant Diorama, just add MDF...

A month or so ago I made mention of creating further micro-dioramas of a similar size to the abandoned coach scene, i.e. 140 x 70mm. I felt this size worked well visually in my display case as some previous scenes had ended up looking too long. Having prepared a pair of new 6mm MDF bases I started to plan to build new scenes in both O9 and 1/24th, the latter to display my scratchbuilt Lister locomotive.

The Lister had previously sat on this base, which was one of the offenders on length and was taking up more space than strictly necessary:

This was a rebuild of an earlier diorama, which itself was reclaimed from an abandoned 2008 project that would have seen the Lister shuttling back and forth with a single wagon (!). As it was due to be replaced anyway I opted to see if part of it could be recovered as the basis of the new scene rather than start afresh. Very carefully, having mapped out the cuts, and then carefully separated just the top cardboard layer of the foamcore board, I found that it could...

The result above shows the result after some work to make up the gaps in the ground cover, some new areas of grass from hanging basket liner, additional ground cover from scatter applied over hairspray and some grass moss strands. The existing point lever, a vintage OO gauge item, was cleaned up, Grandt Line bolt heads added and suitably painted and weathered.

Although I have made preparations for another O9 scene it is on hold as the next project will be a reworking of 'The Path to...' to bring the textures and detail into line with the latest creations. Watch this space!

Colin