Regular readers of this blog will have seen the trials and
tribulations of the 'Up-cycle' saga, from desktop micro-layout, via combined test
track/diorama to 'The Headshunt' diorama and consequent left-over baseboard.
Recently I realised during preparation for the Sheffield exhibition (on 10th October) that the test
track I had subsequently set up at the side of, and at right angles to the workbench was not only a
little precariously high, but also didn't give much 'run' if you needed
something beyond rolling road testing. This has led me to drag the original
Up-cycle board from the corner of the shed for revitalisation. Having removed
what was (still) left of the original trackwork, I shortened the board at the left-hand end by
approx. 8 inches back to the next timber support underneath. A new plywood end
was added and the timberwork tidied up and given a fresh coat of paint.
On the
baseboard surface the holes in the cork from point switches and operating rods were
filled with offcuts of cork sheet. Some flexible filler was wiped into any cracks creating the white patches in the picture above and a coat of varnish applied. The cork surface is quite rustic in comparison with the neat paintwork! The next task will be to add some track and wiring.
Some brief consideration was given to using the offcut 8
inches to make another diorama in the same style as 'The Headshunt', however
despite a little work towards this aim, and the creation of the mock-up below using
various items to depict a footpath crossing the line, this recipe for left-over soup was abandoned and the offcut
dismantled. However, it has set thoughts of another diorama in mind, so watch
this space...
Colin
No comments:
Post a Comment