Back to the 422 Wagons

Whilst work progresses on the pizza layout, I have finally got the two 422 Modelmaking wagons painted and attached to their Peco chassis. 

Painting followed my usual path of a spray of grey primer followed by painting the interiors in a bare wood colour. A black-grey wash and brown wash followed to highlight the plank and grain lines. Dry-brushing then followed, lighter colours in the interior and a semblance of paint on the outside. Ironwork was picked out in black-grey and some some light dry-brushing highlighted edges and gunmetal was dry-brushed onto the bolt heads etc. Everything was sealed in place with a spray of  Humbrol acrylic matt varnish.

The one-plank wagon has a brown (ish) tinge outside and is weathered with weathering powders to look as if it has carried a sand load recently, including runs outside the body where the top has been lifted off Heywood-style.

The drop-side has a grey tinge to the exterior although one plank has no paint at all. The interior load weathering is more of a brown tinge and again this has been extended to the exterior where the load has spilled during unloading.

Jumping back a stage, prior to fitting the chassis I decided to add a little extra weight to the wagons alongside the Peco weight. I used self-adhesive lead window strip in the under-side voids that would surround the Peco weight to use the space effectively, as demonstrated below.

I then placed the Peco weights into the spaces, mixed up some epoxy and filled the two smaller holes, sitting the Peco chassis into the weight and securing chassis to weight and wagon all in one go. 

Couplings are still required, I need to find a spare evening to tackle some Greenwich assembly...

Colin