Monday, 26 May 2025

Sign of the Time


The office at 'odsock Corner now has a sign to indicate to all lost souls where they have ended up. However, it may not assist their confusion...


Whilst I could have created this sign and the ghost letter effect entirely on the computer I actually went down a more convoluted, yet practical route by starting with an actual sign. This uses a wooden sign blank purchased from The Works (cut-down to three planks from four) and self-adhesive cardboard letters from Boyes. 

The sign blank was sprayed with grey primer and sanded to a weathered effect, whilst the letters were temporarily fixed to a scrap of cardboard and sprayed black. The letters were then stuck to the sign and because the adhesive wasn't that great, the whole thing was then sealed with diluted matt medium. The letters were then dry-brushed with grey emulsion from a match-pot to give them a worn effect.


The intention is that the bottom plank will eventually have some extra info added such as scale/gauge info. However I needed to leave it blank to create the model sign... 

The next stage was to photograph the sign square-on on the back step of the house in daylight (but not bright sunlight), adding in an unpainted 'H' on the bottom plank in order to create the ghost letter on the final sign. This photo was then manipulated in my editing software to create the signs for the model, moving the ghost letter to join the top plank and carefully blending the join.


Three sizes of sign were printed on glossy photo paper, which was given a coat of spray matt varnish and left to dry overnight. The middle size was chosen and cut out with the raw edges touched in with a pencil. The resultant signs were then fixed in position and matt varnish run around the edges to kill the shine from the pencil.

As part of the same exercise I also created some small 'Private Keep Out' signs for the gateway, these were created entirely in my image software but treated in the same way as the nameboards.


I'm not sure if the rabbit will pay any attention... 

Colin

No comments:

Post a Comment