Three Pound Mini

There is a new arrival at 'odsock Corner in the form of a Mk1 Mini tucked to one side of the lane. It's very unlikely anything will be able to get past!

The original sketch from many years ago that was eventually brough to life as 'odsock Corner did indicate a vehicle could fit here, and I teased an ice cream van in the space last year. However to be as practical as possible in the daft space a smaller vehicle was going to give a better balance to the scene so I sought out a Mini. After some research into the various options in 1:43 scale I opted to go with the Lledo Vanguards model as I felt the shape looked about right. A trip to a local toy fair before Christmas found one in the original packaging for just £3.00.

It is quite a basic model, I think later versions were probably improved a little but the basis was there for some modelling work to create something unique. Creating a reasonable "layout" model from a cheap diecast is the sort of thing the late Chris Ellis, editor of Sale Trains and Model Trains International, would have encouraged. The model required old-school dismantling using a power drill to drill out the rivetted joint underneath the bonnet and then unclip the rear registration plate.

I failed to take any work in progress shots but the notable work included:

• Fixing the front wheels with a slight steer to the right and sanding a flat into the base of the tyres so the model sits better on the road,
• T-cutting the paintwork on the body to remove imperfections in the surface (I picked this tip up in one of Gordon Gravett's books) and carefully removing paint from handles and trim reveal the metal surface,
• Spraying the body, chassis and interior with Humbrol matt varnish, subsequently re-coating the body in Halfords matt lacquer as it looked too matt (!),
• Weathering, including the wheels (more about them another time...) and a few bird deposits to hide lumps in the paint on the roof,
• Adding (HO scale) windscreen wipers over the moulded originals and weathering the screen.

Finally everything was re-assembled and the drilled out rivet filled with Araldite and clamped together whilst drying. 

A few other additions of note are the usual Araldite on the headlights and some printed items in the form of a newspaper and crisp packet in the front window and a Tesco carrier bag on the parcel shelf, These came from a Scale Model Scenery print-at-home sheet printed on matte photo paper. The registration plates were created using an online generator for real plates, screenshot and manipulated to size and printed on glossy photo paper. In all these cases I have peeled back the layers at the back of the paper to make it thinner with less of an "edge". The registration plates had the edges touched in with a pencil to hide the whiteness.

All in all this has been a very pleasing project. Whilst the result may not pass really close scrutiny (especially the windscreen wipers) it is really at home on the layout.

Colin