Saturday, 6 August 2016

Theakston - Rusty and Dusty

The last time we saw the Roger Chivers Theakston wagon it was still in bare plastic. I subsequently sprayed both the body and underframe in red oxide primer and put it to one side as other priorities took over.


At a local 009 Society (Gasp!) event I was able to pick up some 7mm diameter wheelsets of Bemo origin, which resulted in me altering the coupling mount height to suit and at the same time adding a coupler to the other end rather than use it as the end wagon of a rake. I then sprayed the body in grey primer over the red oxide, deliberately leaving a few rough spots and not really bothering too much in the interior at all (!). 

Once dry I washed over the grey with a dark grey wash, wiping this off the panels where necessary to allow colour to build in the strapping. The strapping and interior were then overcoated with a brown wash, and once dry some dry brushing added a rustier tone. Meanwhile, the underframe was painted in Humbrol red/brown, with the W-irons in grey/black. Again once dry the brown wash was used to tone the colours down. I then glued the underframe and body together, and once set added a coat of matt varnish. The final step has been dry-brushing to blend the two sections together and make it look suitably 'used'. 


Finishing-off jobs included MicroTrains couplers and adding about 63mm of lead window strip as weight underneath.

Certainly a recommended kit.

Colin

No comments:

Post a Comment