Parking up the Mini

Perusing Phil Parker's blog I spotted that he had recently completed a 7mm scale Mini from the Airfix/Heller kit. It is a later model than my Mk1 but interesting to see an alternative approach to modelling one. It did prompt me to carry out one more job on my model, to secure it in place on 'Odsock Corner. But before that I did a little extra painting and scenic work to add a moss effect to the top of the wall, having realised it still looked far too clean! 

So last weekend Saturday morning started with the Mini on it's roof with 1mm brass wire poking out of two of it's tyres... Before going any further, you may notice that I have added some body colour paint to the chassis piece under the front and rear bumpers. This was a result of a review of some more prototype photos and by Phil's model. It looks a different shade here under the light but in place on the layout it is not noticeably different.

I had been wondering for some time how to fix the Mini in place without actually sticking it down. For the Vauxhall Astra on 'Shifting Sands' I used the screw hole that previously held it into the packaging and a suitable bolt through the baseboard. No such luck here... and my original idea to use long 12 BA bolts into the tyres failed when I realised I had nothing long enough. I calculated the thickness of the baseboard and other layers to be getting for 20mm! Using a template I drilled into the tyres and fixed the rod with epoxy resin. It is seen below checking all is well prior to the next stage.

The template was then used to locate and drill the holes in the layout, initially at 1mm but then to 1.5mm to allow a little leeway and for the differences in materials (the wires tended to get stuck having gone on a wander through the foamcore layer over the main ply baseboard top). Here I have held the template using a cocktail stick in the first hole and I am drilling the second hole.

With the holes drilled I positioned the car and then undertook one of those jobs that needs three hands... I held the board on it's side, pushed the car down to the road surface and underneath, slid the inside of a small chocolate block connector over the wire and screwed it on tightly. Did I say three hands? make that four... This actually the system used on 'Shifting Sands' to hold the lamp-posts in place and allows for the Mini to be removed if required at a later date.

Whilst carrying out this work I decided that at some point soon I'll paint up my two remaining Pigeon castings to add to the wall ready to take aim at the car having no doubt added more mess to the wall!

Colin

Three Pound Mini

There is a new arrival at 'odsock Corner in the form of a Mk1 Mini tucked to one side of the lane. It's very unlikely anything will be able to get past!

The original sketch from many years ago that was eventually brough to life as 'odsock Corner did indicate a vehicle could fit here, and I teased an ice cream van in the space last year. However to be as practical as possible in the daft space a smaller vehicle was going to give a better balance to the scene so I sought out a Mini. After some research into the various options in 1:43 scale I opted to go with the Lledo Vanguards model as I felt the shape looked about right. A trip to a local toy fair before Christmas found one in the original packaging for just £3.00.

It is quite a basic model, I think later versions were probably improved a little but the basis was there for some modelling work to create something unique. Creating a reasonable "layout" model from a cheap diecast is the sort of thing the late Chris Ellis, editor of Sale Trains and Model Trains International, would have encouraged. The model required old-school dismantling using a power drill to drill out the rivetted joint underneath the bonnet and then unclip the rear registration plate.

I failed to take any work in progress shots but the notable work included:

• Fixing the front wheels with a slight steer to the right and sanding a flat into the base of the tyres so the model sits better on the road,
• T-cutting the paintwork on the body to remove imperfections in the surface (I picked this tip up in one of Gordon Gravett's books) and carefully removing paint from handles and trim reveal the metal surface,
• Spraying the body, chassis and interior with Humbrol matt varnish, subsequently re-coating the body in Halfords matt lacquer as it looked too matt (!),
• Weathering, including the wheels (more about them another time...) and a few bird deposits to hide lumps in the paint on the roof,
• Adding (HO scale) windscreen wipers over the moulded originals and weathering the screen.

Finally everything was re-assembled and the drilled out rivet filled with Araldite and clamped together whilst drying. 

A few other additions of note are the usual Araldite on the headlights and some printed items in the form of a newspaper and crisp packet in the front window and a Tesco carrier bag on the parcel shelf, These came from a Scale Model Scenery print-at-home sheet printed on matte photo paper. The registration plates were created using an online generator for real plates, screenshot and manipulated to size and printed on glossy photo paper. In all these cases I have peeled back the layers at the back of the paper to make it thinner with less of an "edge". The registration plates had the edges touched in with a pencil to hide the whiteness.

All in all this has been a very pleasing project. Whilst the result may not pass really close scrutiny (especially the windscreen wipers) it is really at home on the layout.

Colin