Showing posts with label Misterton Fen Tramway. Show all posts
Showing posts with label Misterton Fen Tramway. Show all posts

Sunday, 28 February 2021

More in Paper, Pencil and Cardboard

After planning a scenic treatment for the Julian Andrews brickworks plan that didn't incorporate a running line hidden in a building, I decided to try a version that was closer to the original in that respect. This plan also moved the trees towards the background and potentially does away with the backscene on the left hand side of the board.

The building as sketched is a close copy of the one completed Misterton Fen Tramway structure, the workshop. I sold this on, due to storage space constraints, so it would be good to recreate it in some way.


Mocking this up in finest cereal packet card created a better effect than I had anticipated, The grouping on either side of the trees/smaller huts and the tree/tank/workshop seems to work well. The idea is that this layout will be my first use of a photographic backscene so there won't be quite such an apparent gap in the scene. The Port Wynnstay hut features again whilst the adjacent engine shed could equally be a concrete sectional structure rather like the old Skegness miniature railway example that I built extra wide and in low relief a few years ago.


There may be a few more ideas to consider, but I might have to eat some more cornflakes!

Colin

Friday, 26 February 2021

Planning in Paper, Pencil and Cardboard

Drawing inspiration from the old 'Misterton Fen Tramway' sketches and the more recent pizza exercises I have now sketched a few ideas for my project based on the plan of Julian Andrews brickworks layout. These initial ideas have dropped the line running through a building approach of the original.

The first sketch uses a round tank on stilts very much like the one in the old sketches. The arrangement on he left hand side incorporates a workshop containing some machine tools that I have in my possession. The building would be based architecturally on the one part of the MFT that got completed - the workshop. I sold this on, due to space constraints, so it would be good to recreate it in some way.


I came up with an alternative for the right hand side that used the Port Wynnstay hut and a modified Airfix/Dapol tank (on brick piers). However, my mind must be in 009 mode still, when I attempted a 3D mock-up it wouldn't quite fit as sketched and I had to adapt the idea a little.


This was certainly a starting point, I had a few concerns about being able to see both lines curving away and how that might look, especially as I envisaged backscene boards both sides of the scene. Also the two trees I had in mind to use in the scene have turned out to be better background trees than foreground examples.

More soon...

Colin








Friday, 19 February 2021

Pizza Ponderings 2 - Square Pizza

There used to be a pizzeria locally who's trademark was square pizza. I suppose it is better box space utilisation if nothing else... 

Curious I took the estate scene pizza and translated it to the same 13 x 19" board size as my 009 scene 'Old Quarry Line', retaining the 5" radius curves of the pizza but adding in a straight on each side allowing a short siding to be incorporated.


Having checked with a full size plan the siding would probably have to be curved in reality, but it just about fits. Overall the scheme reminds me of some of the micro layouts that James Hilton has built over the years, more recently in OO6.5.


At 13 x 19" is isn't much smaller than the 15 x 24" of my stalled corkboard scheme but it seems a very different style of scene. All this thinking is leading towards how this project could be restarted and as part of that process I have revisited some older sketches made during the development of the 'Misterton Fen Tramway' scheme (another square pizza) to see how I tackled issues such as the line vanishing behind the buildings and through the hole(s) in the sky.


In the scheme above a tank on brick piers, and a simple block structure hide the exits. The tank was the focus of my attention, I think it was envisaged as Knightwing on scratch built piers but could easily be fully scratch built. In the scene below the all too familiar hut appears!

Eventually a full size mock-up was made, by this stage I had actually extended the board a little at either end. A combination of structures and trees would hide the exits reasonably well.


Ideas are now starting to fall into place and thoughts are turning to how the corkboard inspired scheme can be taken forward...

Colin


Thursday, 20 October 2016

Rambling Thoughts of a Desk-Sitter

I've spent some time over the last week or so looking at some of the half completed odds and sods about the place and trying to create some sort of order from them. Having disposed of at least one offending item my thoughts drifted towards the possibility of a 'desk-sitter' shunting plank approx 25 x 6"...


Of course we have been here before, most recently with 'Upcycle', which was a little longer at 29" long, which was one of the issues that actually made it difficult to use as it was too tight a fit on the desk (i.e. too much needed clearing out of the way!)


If a new project does come into being, the lessons of Upcycle will be taken on board, notably having a decent height of backscene and not having a kick-back siding making life difficult. One option is to take the "less is more" single point approach that worked well on another desk-sitting project, my Gn15 'Ambassador Works', seen here in full form... on a desk...


Whilst delving through photos of past projects, it is worth pointing out that the balsa framed, foamcore topped baseboard being considered for this project is the much altered remains of the 'Misterton Fen Tramway' board from a few years ago. Subsequently used as a test track it was ironically replaced by 'Upcycle' and it's descendants. I have recently extended it at the right-hand end and for this project the left-hand end would also be extended.


We shall see...

Colin

Saturday, 25 August 2012

Bits and Pieces

A mixture of recent workbench happenings...


The various bits to fill the Sherwood Forest-style open wagon have now been added to the wagon.  The tool box is a Black Dog/Sidelines resin casting (depending on which scale you use it in!), as are the re-railing ramps. The spanner carelessly left on top of the box, and the hammer are Duncan Models castings.  The jerry can is a Cararama moulding from the garage set used as an interior to a building on the never-completed Misterton Fen Tramway.  The wagon load is now, well, loaded, I've used 'tacky wax' to fix things in place:


Turning to the out-of-use bogies, I spent some time treating and painting the Parkside wheels to make them look less model-like.  Rather than paint them all over I opted to blacken the axles using gun blue, then spent some time flicking rust colour paints at them using a toothbrush (as per a recent article in 'British Railway Modelling').  Whilst this didn't perhaps give the build up of colour I had hoped for, the effect is actually there, just very subtle.  A spray over with the Citadel 'Purity Spray' killed any shine and I actually think they do look like used, but not abandoned too long, bogies:


Just to prove that you do see this sort of thing lying around, I took this picture of a Severn-Lamb bogie frame in the engineering yard at Lightwater Valley last week (with permission):


Finally, a quick update on 'Kestrel' as the painting process draws to a close and the glazier is on stand-by....



I've added a little dry-brushing in places to overcome the slightly less than satisfactory after-effects of the varnish spray.  I think I'll get away with it....


Friday, 10 February 2012

Carrying the Goods

As regular readers will know, my O9 modelling has mostly centred around passenger carrying miniature railways, as these are of the greatest interest to me, and are perhaps the most realistic use of the scale/gauge combination as 9mm is closer to 15" gauge than 18" gauge in 7mm scale.

However, from time to time I've tried to dabble in industrial and/or estate prototypes, most notably recently with the never to be completed 'Misterton Fen Tramway'.  In it's latest build phase I did put together a couple of 3-plank dropside opens and described them alongside a gauge convertible i/c loco here.


The one on the left used the chassis and resin floor from the twin-oil barrel carrier that used to run in the 'Shifting Sands' works train, whilst that on the right was a new build on a spare Black Dog chassis.  These two wagons finally made the paint shop recently for a blast of red oxide primer, but not until I had replaced some of the bolt heads on the ends with Grandt Line mouldings.  They can be glimpsed in the background of this workbench shot:


Painting the two wagons turned my thought to adding to the fleet. I hit on the idea of a chassis swap for another of the 'Shifting Sands' works fleet, a rebuilt Black Dog chequerplate flat. This was carefully stripped down, removing the floor and extra some sideframes I had added from Plastruct section. The floor has been rebuilt to sit on an RCL skip frame (which in a previous plan was destined to be a static drum carrier due to issues with the wheels on MicroTrains magnets).  This will be permanently coupled to a partner to alleviate this issue.


With a MicroTrains coupler added at one end, a rather nifty link to the other wagon was constructed by shaping and twisting a long brass split pin to resemble a prototypical coupling bar - even if it does end sat in the loop of another split pin on the other wagon:


Meanwhile, the Black Dog Mining chassis emerged as a one-plank, fixed side open. This is a simple build in styrene on the recycled Shifting Sands flat wagon frame, using a floor from an abandoned Gn15 wagon project.  Detail comes in the form of Evergreen strip, rod and some Grandt Line bolt heads:


As Dave Lister of the mining ship 'Red Dwarf' would have it, there are always a few parts left over.... the wagon above was to have been another 3-plank, so the off-cuts of the sides and ends have been joined by a floor, like the wagon above this is recycled from an older project, to form a ready to build kit. This may benefit from the fake channel section frames removed from the Shifting Sands flat and the 'research' into using Dapol railbus axle boxes....




Saturday, 31 December 2011

Rollin' Rollin' Rollin'...

Last night I sat at the new workbench and actually wondered what to do!  It's almost as if I'm out of practice...

Thinking back a couple of days, my Dad had shown me his Boxing Day project of building a home for his Modelex rolling road, comprising of a small baseboard, a short running line and his rolling road firmly fixed down.  I had been impressed with his rolling road when he first purchased it and had researched something similar for myself, however being a multi-gauge modeller it would be expensive to buy one in 16.5mm gauge and 9mm gauge.

Enter DCC Concepts, who have devised a nifty re-gaugeable set of rollers that sit on conventional track and can be gauged for 9mm, 12mm, 16.5mm and 18.2/18.83mm gauge track by use of different inserts.  This allows folk like myself to benefit from one set of rollers to suit several projects.  I purchased a set online earlier this year and although I have been able to test them, I hadn't put any thought into how they could be set up longer term.

The Rolling Road being tested by my industrial diesel on the 9mm gauge track.
The set-up above was created by recycling parts of the balsa framed/foam core topped baseboard from the 'Misterton Fen Tramway', hacked about to create a board 14" by 6".  Track takes the form of a length of Roco HOe track given to me a couple of years ago by Jordan Leeds and a length of Peco code 75 that was fished out of a bin last year, left by someone who couldn't see it's usefulness once it was kinked!

Electrical set up, plug in, one switch, simples!
The electrical connections are also salvaged from the MFT, let into the baseboard frame at a point where some damage had occurred to the balsa wood frame.  A slide switch allows the user to switch between the 16.5mm and 9mm gauge tracks.

So far I have only found one problem... the bogie mouldings on some American Bo-Bo diesels don't clear the rollers properly.  It's a good job you can run things up and down the tracks as well!

Sunday, 14 August 2011

Misterton Fen Tramway - Really the End...

I've mentioned the Misterton Fen Tramway before - here in fact.  This micro O9 layout got started but never hit the mark, and today saw the demise of it's second incarnation as a end-to-end version.

As the rails were soldered at the joiners I had to carefully heat these up to remove the plain track from the turnout, but before I did a quick photo was in order:


After a short while, with all joints unsoldered, track started to be lifted, no doubt due to be recovered on a seaside miniature railway somewhere!  All electrics, switches, plugs etc have also been recovered for re-use.  In fact the board itself is now stored back in the same place it had been, with thoughts of how it might be used in the future (the distant future I hasten to add!).


Although theoretically part of my great sort out to enable use of the railway cupboard as a workbench location, it hasn't actually made any more space but gave a strange satisfaction I had done something, just as I achieved a few days ago when I stuck new axleboxes to a 4mm scale kit-built van prior to sale!

Finding what can be disposed of and sold is a tricky one.  I have to remind myself it is about the space not the money (useful though that is).  Interestingly I have found that most of the things that are going belong to a period some time ago, or have been bought very recently during my indecisive years.  Not a lot of 7mm scale material has been identified yet, however I have had to make a decision that O14 will have to wait for a long time so I have put up for sale a job lot of parts I had stashed away, in the form of a track starter kit, turnout levers, built skip wagon and a bonus of a Phoenix figure.


Edit in response to Skylon's question.... it would have looked something like this:

Monday, 25 April 2011

Misterton Fen Tramway - Alas no more!

Sadly today I have to report that I have pretty much pulled the plug on the Misterton Fen Tramway.  I could understand if you have managed to miss this little project, it was covered only on the NGRM Online forum and development was sporadic to say the least.

The story actually started with a plan to build an industrial style O9 layout, using the green battery loco illustrated in the last entry.  After a short period 'on hiatus' the scheme grew a little in size and became a 18" gauge Lincolnshire fen tramway, serving the potato fields and other agricultural needs of the area.

The original industrial version had been about 12" x 14" - the scenic section was to be the same size as a box file.  The agricultural version grew (pun only marginally intended) to about 19" x 12".  I created a full blown mock-up in cardboard....

The MFT mock-up in cardboard.
As can be seen, by now motive power was the Knightwing bash.  In the meantime there had been a Keef loco built, but I'll save that for another day.  A backscene would have enclosed the left hand end of the layout, featuring a 'flat' of a farmhouse.  The centre area would have housed a tank (modified Knightwing) and a small workshop, which was designed around this Cararama garage set:

Cararama garage set - all for £5.99!
The workshop building was the only part of the project to reach an advanced stage, constructed around the (much modified) walls of the Cararama diorama and mostly made from mounting card, covered with Slater's brick plasticard and Howard Scenics brick arches over Airfix engine shed windows:

Workshop under construction.
Having completed the roof using 4mm scale Wills pantiles (which pass muster for 7mm scale), I carefully painted the brick colours over a grey primer base.  I have an aversion to the Humbrol - prescribed 'Brick Red' and aimed for an orangey tone to the brickwork and felt that I had achieved that:

Completed workshop - water butt belongs to an Airfix 'Rocket' kit.
Alas the MFT has not progressed since, due to the amount of time I'm currently spending on what I term "1:1 modelling" - i.e. progressing work on our recently bought house.  This week it has been real 1:1 modelling involving various bodges around an elderly coal shed door...

I actually lifted the track on the MFT board several months ago in a bout of dissatisfaction, I did relay it as an end-to-end run but it still doesn't hit the mark.  When the time comes, should I still desire an 18" gauge agricultural tramway I'll start afresh.  

Colin