A few weeks ago I posted a picture of a twig pretending to be a tree as part of my sketching out of the scenery for 'odsock Corner. Shortly afterwards I started to rework the twig into a tree using some old Hornby wire foliage branches (from the Skale Scenics range 10-15 years ago), removing their lumpy foliage and supergluing them in place on the adapted truck.
At this point I did propose to use another twig to make something a little taller and narrower to better fit this location. It had only taken a couple of hours to get to this stage and I planned to store this for future use elsewhere. However I then decided to make changes to the existing frame by pointing the branches upwards rather than outwards, and twisting in some extra smaller branches at the extremities. I then used modelling clay to smooth out the joins between the twig and the branches.
To further blend the wire branches to the trunk I mixed up some of my remaining scenic mix of paint/PVA and added in some tile grout to stiffen the mixture, I had hoped this would be a good basis for bark but it dried quite light.
Contrary to popular opinion, tree trunks are not brown, more a grey-brown-green mixture and to create this effect I started with grey primer and Humbrol brown spray paints, spraying uneven coats of them both to create a mottled effect. The brown can was splattering quite a bit and gave up shortly afterwards, another one to add to the shopping list!
To blend the colours together and add shadow into any recesses I gave the tree a wash of black-grey all over and when this was dry I dry-brushed grey-green over the lower trunk and branches, getting as far up as I could angling the brush between the branches. This gave a very pleasing effect and I had one of those "stop" moments before I went too far!
After all this work to the armature I feel that I have achieved a much better shape than I had initially created and a very satisfactory colour. It is now ready to add the foliage in due course before planting it in place on the layout alongside the modified Hornby tree (which requires a few further changes) and the recently purchased fir tree.
Colin
No comments:
Post a Comment