Buffers and Baggage

For a while I really couldn't be motivated to get anything going on the workbench, however the weather was really telling me to stay indoors and do something so I came up with a couple of schemes to get started on. 

The first was a reworking a Black Dog Mining (style) wagon as a luggage trailer for the O9 railcar, filling the cutouts for MicroTrains couplers and fitting pre-painted Black Dog coupler/buffer blocks in their place to accommodate a link-and-pin coupler to the railcar. A careful touch-up of the paintwork has made a pretty neat job of the changes.

Of course a luggage trailer needs some luggage, so a root around found a Preiser backpack, suitcase and bag, all pre-painted some time ago. To this I added an older style case using a modified ammo case from a ground crew set, and a bike from a rather basic 3D print I had acquired, possibly from Avalon Line. This filament print required a fair bit of fettling to look anything (and you have to ignore it's square frames!), and I had to add my own pedals from a bent staple and 5 thou styrene. The other side is very poor, but you'll not see that...

Bringing it all together, this is the result with the load fixed in place using 'Tacky Wax', I hope the bike was placed in carefully on top of that luggage! I need to fashion a 'U' shaped wire coupler to engage with the loop on the railcar ends.

The other task I set myself was to add buffers and nameplates to the light green A1 Models "Albert" diesel. I had always planned to have buffers, as per the Littlehampton prototype, but had failed to  scratchbuild any buffer shanks to my satisfaction. At the Doncaster show in February I bought some cast oval Dundas 009 ones, and prepared these in red primer before opting in the end to replace the oval heads with turned 4mm round ones, which in this use really make a difference.

I have also finally named the loco, it begins with 'A' but it is 'Amelia' rather than Albert. These are Narrow Planet plates that had previously done a temporary stint on an 009 Gmeinder. With all of these smaller parts for both projects painted and fitted on the dreary days, finally a nicer day appeared when I was able to give everything a waft of matt varnish over the changed bufferbeams on both projects.

In other news, I'm also having (yet) another try at a mini photo diorama to fit in the light box, but simplifying things compared to previous attempts and mock-ups. I'm even working on some ideas for the project after that... 

Colin

 

Narrow Gauge Now

The East Midlands group of the 009 Society have run a successful series of events at Portland College near Mansfield over a number of years, at which I have exhibited both 'Shifting Sands' and 'The Old Quarry Line'. The event keeps growing and is now known as 'Narrow Gauge Now' (North of Watford!). The 2023 event on 22nd July was as good as ever with a range of layouts, ranging from a boxfile to veteran exhibition layouts, and not just in 009...

A special mention for Lockdown Park by Andrew Glover, I'm not usually a fan of whimsey but this has so much going on, including Boris Johnson. I must declare an interest here as I laid the original pizza in the middle on a bare board before selling it to Andrew, who created something beyond my imagination!

I had spotted an O9 layout listed on the event details, Welton Park by the Sleaford & District MRS. Having found nothing but a bare boards picture online I was unsure what to expect, but it was a representation of a passenger carrying 15" gauge railway. You can just see a 'Warship' in the background on passenger stock, with an MG Models Scooter and Classic diesel on yard duties in the foreground.

This group towards the front of the layout look to be suitable passing the time with a cuppa...

Building interiors are well detailed, including this workshop scene.

Despite having a bit of a clear-out recently (or even because...) I allowed myself a couple of purchases, including another set of A1 Models 'Albert' etches and a couple of 3D printed seated figures who looked suitably hunched up to be minimum gauge passengers or maybe even relaxed locomotive drivers. Expensive compared to Chinese copies of a well-known brand but cheap compared to whitemetal figures. I will try and get a picture of them in due course.

Having caught up with a few folk I've not seen for a while and seen some inspiring work, now I just need to get motivated again!

Colin

 

'Monty' - a Familiar Exmoor

The active visiting locomotive at the Cleethorpes Coast Light Railway's 75th Anniversary gala was Exmoor Steam Railway built 0-4-2T 'Monty' from the Evesham Vale Light Railway. Smartly turned out in maroon you could easily be fooled into thinking that this well maintained machine had left the Exmoor works looking like this when first built.

But 'Monty' is in fact a very much rebuilt 'Markeaton Lady', built in 1996 for the much-missed Markeaton Park Light Railway in Derby. Under the ownership of John Bull the loco looked very different, especially as over the years she gained a lovely patina of a working locomotive, a huge contrast to the polished, if sometimes a little wet, appearance she presented at Cleethorpes on Sunday.

The photo above was taken in 2008, and I think was possibly the last time I saw 'Markeaton Lady' in use at Derby. The railway was a handy stop-off when visiting 7mm Narrow Gauge Association events in Mickleover and Burton-upon-Trent, usually a quick visit for a return trip on the way home. The blue Exmoor locomotive clearly had an effect on me, as my own O9 Exmoor model took on the front-end appearance and the colour influence, despite being an 0-6-2T.

Before I built my Exmoor ('St. Edwin') I had originally contemplated an 0-4-2T version on a Minitrains outside-framed chassis. The picture above neatly illustrates why this would not necessarily have worked, as the vertical Minitrains motor would actually be too far forward to fit in the cab. The dimensions could have been juggled a little but as I didn't actually have the chassis at that time it was all rather academic and the 0-6-2T version on an inside framed Bachmann chassis was the result.

The new run-around loop at the CCLR's Lakeside station offers a few new photographic opportunities, I was actually sat on the train taking this photo of the loco approaching the train to take out the next working to Kingsway. Having a loop here makes all the difference to day-to-day operations for the railway by removing the need to top-and-tail workings and just making things much more railway-like for observers such as myself...

The track re-laid last year through the floodgate and up to the first foot crossing is still looking in excellent condition as we see 'Monty' heading out through the gate and onto the coastal stretch of the line. It was remarked during the day that you cannot see as much of the coast as you once could along here, growth in the protected area of the old dunes has restricted this somewhat but there are a few breaks in the vegetation where the water can be seen. From the elevated point on the flood defences you can see a lot more and watching passing ships in the estuary passes time between trains.

The photographs in this entry have not been presented in the order they were taken, in fact the first picture was later in the day when the rain had started. The contrast in weather to this shot is marked, this was before lunch and was one of those moments where due to the lighting conditions the camera on my phone actually produced a better balanced image than my camera. But the weather did not affect my day at the CCLR, even if it did try to interrupt the official proceedings with a storm the day before!

Update: I have now uploaded a larger selection of images at higher resolution to Flickr: Cleethorpes Coast Light Railway Gala 2023

Colin

Cleethorpes Coast at 75

The Cleethorpes Coast Light Railway celebrated 75 years of miniature railways at the south end of the resort over the weekend of July 15th and 16th. Although the 1948 railway was on a different alignment it is regarded as the first incarnation of the present railway for continuity purposes. It is quite a story of private and public ownership, steam, electric and gas-hydraulic propulsion over the years.

To tell this story a new exhibition has opened at Lakeside station telling the story in words, pictures, video and exhibits. A very familiar feature is this mock ticket hut that was constructed for the 'Rails to the Sands' exhibition back in 2010 to the design of Tim Dunn, although yet to feature on his 'Architecture the Railways Built" TV show! You could walk through it in it's previous location, but it now has a very effective background picture depicting the electric age at Cleethorpes in the mid-20th century. This should prove a good 'photo op' for families and children.

Two miniature steam locomotives feature in the display, and will remain on site for the summer season. The first is the locomotive that started it all - the GNR Atlantic that ran in 1948. Remarkably cine film footage of the original line has emerged and is on show, revealing it was painted red (!) Now re-gauged from 9 1/2" to 10 1/4" gauge it is restored in GNR colours.

The first locomotive built specifically for Cleethorpes was the Dove Pacific 'Cleethorpes Flyer'. Certainly not a fine scale machine in engineering or appearance it was based on an LNER Peppercorn outline, but was transformed in later years to depict a British Railways 'Britannia' class locomotive 'Rob Roy' and is usually based at the Eastleigh Lakeside Railway. It has been reunited with an original nameplate for display.

In 1954 the Cleethorpes Miniature Railway was electrified with the arrival of three accumulator powered locomotives with a modern outline. All are now scrapped, but a fourth identical machine was sold to Kerrs Miniature Railway in Arbroath and survived for a longer time before it too was scrapped. Imagine the surprise when the CCLR's owners discovered the cab end on an auction site! John Kerr is co-owner of the CCLR so this is a nice bit of history linking both lines.

On display outside was a 15" gauge visitor depicting an earlier era of seaside miniature railway history was Bassett Lowke 15 'Prince Edward of Wales' visiting from the Rhyl Miniature Railway. It shouldn't be forgotten that rival Lincolnshire resort Skegness boasted a railway operated by a sister locomotive in the early part of last century. It had been planned to run this machine however there were various concerns regarding flange clearances and haulage power so it joined the display of locomotives at Lakeside including CCLR past ('Flower of the Forest') and future in the form of the RVM blue diesel.

Another visitor was running on the main line, in the form of Exmoor Steam Railway built 'Monty' from the Evesham Vale Light Railway. I was familiar with this from a previous life as 'Markeaton Lady' and we will take a closer look at this delightful machine in a future post. As always with these events I tried a few favourite locations for lineside pictures and a few new angles too...

To celebrate the anniversary the CCLR shops are stocked with new designs of postcards, fridge magnets and other merchandise, whilst the Signal Box Inn had a specially brewed CCLR Golden Ale on tap.

Update: I have now uploaded a larger selection of images at higher resolution to Flickr: Cleethorpes Coast Light Railway Gala 2023

Colin

The Headshunt - Taking a Fence (in place of a wall)

As I demonstrated last time the use of a small mirror appeared to resolve my issues with how best to photographically deal with the apparent 'gap' at the left hand end of 'The Headshunt' when pointing the camera in that direction. However the existing wall that represented a bricked-up gateway and pillar was not the best thing to reflect as it just looked odd. Having considered a timber building of some sort, I eventually realised that I was over-complicating things and instead settled on a low-key replacement in the form of two scratchbuilt fence panels made from bass wood. 

Although this looks like a post, rail and board fence it is in fact a cheat, the horizontal members are actually one sheet with cut-outs around the posts and the boards are scribed sheet rather than individual. This double layer of opposing grains made the piece quite strong. Nail marks were made across the planks using a track pin in a pin vice. I deliberately chose a pattern of fence that had a gap in the boarding where the upright stood. The reason for this choice becomes clear with a mirror, camera and slight touch-up 'in post'...

Not the clearest of pictures but it shows the effect well, the gap by the post makes the gap where the mirror sits blend right in!

Colin 

The Headshunt - They do it with mirrors

When we last saw the 'The Headshunt' a couple of weeks ago I was trying to see how the visual gap on the left could be filled for photography using an item of rolling stock. I had a further thought this week as to how the gap at the left-hand end could be "filled" for photography, so I ran an experiment, the Keef was hanging around as it is still for sale (hint)...

Whilst using a small mirror actually does fill the visual gap, it is clear that the reflection really makes little sense due to the doubled-up gatepost. What could work better is a sectional timber building, disguising the mirror with an upright. It is certainly something to consider, especially as it could be combined with the previous idea of an end-of carriage section to visually enclose the scene. 

Just for the record, this is the unedited version of the picture above.

Colin

 

Getting Something Moving - Or Not

As I'm having a bit of a sort out and re-ordering of projects, one of the many issues was ‘Getting Something Moving’ and somehow making it work for me. 

Well the title of the project is now somewhat ironic because nothing is moving. It has been in existence now for three years, I suppose that when I started building in that lockdown Easter it was what I wanted to do but now looking at it with hindsight I'm not so sure... I've tinkered with it a few times since then but it still doesn’t gel. As seen recently I've spent some time playing with different track plans that will fit on the board and spent some time trying to work out if the current track plan could actually be made to work for me without having to do anything too destructive, but the more I looked at it the more the amount of work it needed to achieve what would work felt a little bit overwhelming due to time constraints.  

Well I say current, however despite surviving three Easters since construction started, just one Coronation later...

I had always said that I'll keep the track down on the board until I'd definitely made my mind up whether to retain the track plan, it looks like now I'm at that point! Everything has been recovered from the board and we shall see what develops next. I freely admit I struggle to work with 09 concepts that aren't 15 inch gauge railways as I know them which are as generally speaking passenger carrying pleasure railways. Anything slightly industrial or agricultural to me doesn't sit right. Others (Bill Flude and Graham Watling in particular) manage it far more eloquently than I do.

Colin