Sunday 23 June 2013

Taking a fence, Pretenders, Mites and Burton

(aka "A General Catch-up")

Yet again time seems to have vanished into a black hole, so here's a quick summary of the pre and post Burton developments for 'Shifting Sands'.  Overall the day at the 7mm NGA's AGM went well, it was good to catch up with like-minded O9 modellers and fascinating to see the launch of the first ever plastic kit for O9 rolling stock, from Chivers Finelines.  I'll post something about that another day, I promise!

Firstly, something  visitors to Burton didn't see.... this short length of the new Peco spear fencing appeared on 'Shifting Sands' the weekend before the show, but never became permanent.  Quite simply, despite it being a detail I wanted to add, it just didn't look right.  I think that is due to two factors - firstly it is a little random, even if it is entirely in context, secondly, three panels would probably have looked better than two, in just the same way that an odd number of coaches in a train look better than even.  On a practical note it possibly wouldn't have survived long at the front edge of the board, despite some re-enforcement!

Don't take a fence...
At Burton the layout was graced by a visit from two locomotives belonging to Jordan 'Rough Shunter' Leeds, based on Ravenglass and Eskdale prototypes.  Both were built on commission by Paul Windle and painted by Ken Gibbons.  Sadly the usual 15" gauge story of coupler incompatibility made it impossible to use them in service, and 'River Mite' took objection to 9" curves.

Ratty 'Pretender' visits 'Shifting Sands' (and looks at home)
'River Mite' poses for photographs
The opportunity was taken to line the two locos up with my own Ravenglass style loco 'Cumbia'

Ratty motive power line-up
The view above reveals some of the pre-Burton work on the layout in the shed area, the eagle eyed will see that the caravan has moved back slightly, allowing the installation of a small coaling stage and a revised mix of details.

I had promised myself no further wagon tinkering before Burton, and true to my word I waited.... I did make a couple of purchases from Steve Bennett at Black Dog Mining at the show and these have allowed a couple more wagons to be created to join those assembled after Narrow Gauge North.  It's best not to ask too many questions about how many times some of my Black Dog chassis have swapped bodies and dare I say it I have had my eyes on the Black Dog chassis under some of the 'Shifting Sands' fleet... but that moment has passed (largely after remembering Steve Bennett's compliments about the generator wagon just visible in the picture of 'River Mite') and common sense now reins .  Well, most of the time anyway....

Colin
[Edited 29/06/2013]

1 comment:

  1. Colin, do you have any more photos to share of the Ratty's Pretender? It is this week's favourite engine! =)

    Chris
    cscardinal@live.com

    ReplyDelete